SA213 T22 Alloy Steel Boiler Membrane Wall Panel φ51×6mm for 600°C Power Plant Furnace
Detalles del producto
| Diámetro exterior del tubo: | φ51mm | espesor de la pared del tubo: | 6mm |
|---|---|---|---|
| Material del tubo: | SA213 T22 (2,25Cr-1Mo) | Material de la barra de membrana: | 12Cr1MoV |
| Tono de tubo: | 80-100 mm | Ancho del panel: | Personalizable |
| longitud del panel: | hasta 15000m m | Método de soldadura: | Soldadura por arco sumergido |
| Temperatura máxima de servicio: | 600°C | Solicitud: | Horno de central eléctrica, caldera supercrítica |
| Resaltar |
SA213 T22 Membrane Wall Panel,φ51×6mm 2.25Cr-1Mo Tube,Power Plant Furnace Wall |
||
Descripción del producto
The SA213 T22 Alloy Steel Boiler Membrane Wall Panel features heavy-wall φ51×6mm tubes in 2.25Cr-1Mo alloy steel, purpose-built for the extreme thermal and pressure conditions of supercritical and ultra-supercritical power plant furnace walls. This premium-grade panel delivers unmatched creep strength and hydrogen attack resistance.
Fabricated from SA213 T22 seamless alloy steel tubes containing 2.25% Chromium and 1% Molybdenum. This higher chromium content significantly enhances oxidation resistance, making T22 the material of choice for high-temperature furnace wall applications. Membrane bars are produced from 12Cr1MoV alloy steel for optimal weld compatibility. All panel-to-panel joints are prepared with pre-machined weld bevels for rapid field assembly.
- Premium Creep Strength: 2.25Cr-1Mo composition delivers exceptional creep rupture strength at temperatures up to 600°C, critical for supercritical boiler furnace walls
- Hydrogen Attack Resistance: Higher chromium content provides superior resistance to high-temperature hydrogen attack (HTHA) per API RP 941 Nelson curves
- Heavy Wall Design: φ51×6mm tube dimensions provide extended service life with built-in corrosion allowance for demanding coal-fired environments
- Thermal Fatigue Resistant: Alloy composition minimizes thermal expansion stresses during boiler startup and shutdown cycles
- Precision Manufacturing: CNC tube bending and laser-aligned welding fixtures ensure dimensional accuracy within ±2mm across full panel length
Positive Material Identification (PMI) on 100% of alloy components. Ultrasonic and radiographic inspection of all pressure-retaining welds. Hydrostatic testing, dimensional verification, and post-weld heat treatment documentation included. EN 10204 3.1 certification standard.
| Parameter | Specification |
|---|---|
| Tube OD | φ51mm |
| Tube Wall Thickness | 6mm |
| Tube Material | SA213 T22 (2.25Cr-1Mo) |
| Membrane Bar Material | 12Cr1MoV |
| Tube Pitch | 80-100mm |
| Welding Method | Submerged arc welding |
| Max Service Temperature | 600°C |
Aspectos destacados del producto
Panel de pared de membrana de acero de aleación SA213 T22 2.25Cr-1Mo con tubos de pared pesados de φ51×6 mm para paredes de hornos de centrales eléctricas. Resistencia a la fluencia superior hasta una temperatura de servicio de 600 °C.
Calderas de alta presión de potencia Calentamiento de la superficie de la membrana de la pared Soldadura de arco de argón para calderas de biomasa
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Economizador de tubos H Fin de soldadura de alta frecuencia para calderas de centrales eléctricas ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Acero al carbono SA192 Supercalentador bobina soldadura por arco de argón 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Calderas industriales SA210A1 Calderas de acero Economizador de intercambio de calor Parte Certificación ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Por favor, utilice nuestro formulario de contacto de consulta en línea de abajo si tiene alguna pregunta, nuestro equipo se pondrá en contacto con usted tan pronto como sea posible.
