SA210 Gr.A1 Carbon Steel Boiler Membrane Wall Panel with φ38×4mm Tube and ASME Standard Compliance
Detalles del producto
| Diámetro exterior del tubo: | φ38mm | espesor de la pared del tubo: | 4mm |
|---|---|---|---|
| Material del tubo: | SA210 Gr.A1 | Material de la barra de membrana: | Acero de carbono Q235B |
| Tono de tubo: | 60-80 mm | Ancho del panel: | Personalizable |
| longitud del panel: | Hasta 12000 mm | Método de soldadura: | soldadura por resistencia de alta frecuencia |
| Presión de trabajo: | Hasta 9,8 MPa | Solicitud: | Caldera industrial, HRSG |
| Resaltar |
SA210 Gr.A1 Membrane Wall,φ38×4mm Carbon Steel Panel,ASME Gas Tight Welded Tube |
||
Descripción del producto
The SA210 Gr.A1 Carbon Steel Boiler Membrane Wall Panel is a critical pressure part designed for industrial boilers and heat recovery steam generators (HRSG). Constructed with φ38×4mm seamless carbon steel tubes welded to continuous membrane bars, this panel forms a gas-tight enclosure that ensures optimal heat transfer and combustion efficiency.
Manufactured from SA210 Gr.A1 carbon steel tubes per ASME Section II specifications, with Q235B carbon steel membrane bars. The tubes and fins are joined using high-frequency resistance welding (HFRW), creating a homogeneous, leak-proof bond that withstands high-temperature flue gas environments. Each panel undergoes 100% non-destructive testing including radiographic and ultrasonic inspection.
- Gas-Tight Construction: Continuous membrane bar welding eliminates gas leakage, improving boiler efficiency
- ASME Standard Compliance: Manufactured to ASME Boiler & Pressure Vessel Code Section I and Section II
- Superior Heat Transfer: Optimized tube pitch design maximizes radiant heat absorption from the furnace zone
- Pre-Assembled Panels: Factory-welded into modular sections for faster on-site installation
- Corrosion Resistance: Shot-blasted and primed surface treatment protects against atmospheric corrosion during storage and transport
Every membrane wall panel is hydrostatically tested at 1.5x design pressure. Material certificates, test reports, and full traceability documentation are provided with each shipment. Our ISO 9001:2015 certified facility ensures consistent quality across all production batches.
| Parameter | Specification |
|---|---|
| Tube OD | φ38mm |
| Tube Wall Thickness | 4mm |
| Tube Material | SA210 Gr.A1 |
| Membrane Bar Material | Carbon Steel Q235B |
| Tube Pitch | 60-80mm |
| Welding Method | High-frequency resistance welding |
| Standard | ASME Section I, GB/T 9222 |
Ideal for coal-fired utility boilers, biomass boilers, waste heat recovery steam generators (HRSG), and industrial process steam boilers. Custom panel dimensions and tube configurations available upon request.
Aspectos destacados del producto
Panel de pared de membrana de caldera de acero al carbono SA210 Gr.A1 con tubos de φ38×4 mm, construcción soldada hermética al gas estándar ASME para calderas industriales y aplicaciones HRSG.
Calderas de alta presión de potencia Calentamiento de la superficie de la membrana de la pared Soldadura de arco de argón para calderas de biomasa
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Economizador de tubos H Fin de soldadura de alta frecuencia para calderas de centrales eléctricas ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Acero al carbono SA192 Supercalentador bobina soldadura por arco de argón 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Calderas industriales SA210A1 Calderas de acero Economizador de intercambio de calor Parte Certificación ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Por favor, utilice nuestro formulario de contacto de consulta en línea de abajo si tiene alguna pregunta, nuestro equipo se pondrá en contacto con usted tan pronto como sea posible.
