Calderas de acero al carbono de alta presión con 92,4% a 94,5% de eficiencia y 5 años de garantía
Detalles del producto
| Tipo: | Circulación natural | Estructura: | tubo de agua |
|---|---|---|---|
| Presión: | Presión alta | Producción de vapor: | Max. 20 t/h |
| Estilo: | Horizontal | Combustible: | Fuentes de energía |
| Producción: | Agua caliente | Material: | Acero carbono |
| Combustible del diseño: | Petróleo Gas Carbón Combustible | Eficiencia: | 92,4%--94,5% |
| Peso: | 1-20 toneladas | Diámetro: | 76 mm ~ 914 mm |
| Longitud: | 23000mm | Temperatura: | 300~1500℃ |
| Componentes principales: | NoEnName_Null | ||
| Resaltar |
Cañón de alta presión,920,4% a 94 |
||
Descripción del producto
| Diámetro (OD) | ¢ 76mm ~ ¢ 914mm |
|---|---|
| Duración ((máximo) | 23000 mm |
| Temperatura ((°C) | 300 ~ 1500 |
Aspectos destacados del producto
Cabezal colector de caldera de intercambio de calor de alta eficiencia para uso industrial. Presenta una eficiencia del 92,4% al 94,5%, funcionamiento a alta presión (máximo 20 t/h de vapor) y garantía de 5 años. Hecho de acero al carbono duradero, adecuado para combustibles de carbón/petróleo/gas. Tamaños personalizados disponibles (76-914 mm de diámetro). Certificado de seguridad con informes de inspección salientes.
Calderas de alta presión de potencia Calentamiento de la superficie de la membrana de la pared Soldadura de arco de argón para calderas de biomasa
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Economizador de tubos H Fin de soldadura de alta frecuencia para calderas de centrales eléctricas ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Acero al carbono SA192 Supercalentador bobina soldadura por arco de argón 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Calderas industriales SA210A1 Calderas de acero Economizador de intercambio de calor Parte Certificación ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Por favor, utilice nuestro formulario de contacto de consulta en línea de abajo si tiene alguna pregunta, nuestro equipo se pondrá en contacto con usted tan pronto como sea posible.
