High Frequency Welding Spiral Fin Tube For Customized Heat Exchanger
Detalles del producto
| Estructura: | tubo de agua | Combustible: | Biomasa, fuego de carbón |
|---|---|---|---|
| Tipo: | Pieza de la caldera | Presión: | Baja/Alta presión |
| Gama de aplicaciones: | Central eléctrica, industrial | EspecificacionesPersonalizado: | Personalizado |
| Color: | Personalizado | Material: | Acero de carbono, acero de aleación o equivalente |
| Resaltar |
high frequency welding spiral fin tube,customized heat exchanger fin tube,boiler fin tube with warranty |
||
Descripción del producto
High Frequency Welding Spiral Fin Tube For Customized Heat Exchanger
Can Boiler Fin Tubes be customized according to boiler specifications?
Yes, Boiler Fin Tubes can be fully customized. Manufacturers can adjust parameters such as base tube diameter (e.g., 25mm/38mm), fin height (e.g., 10mm/15mm), fin thickness (e.g., 1mm/1.5mm), and material to match the boiler’s rated power, operating pressure, and heat transfer load.
Product Description
Spiral finned tubes are widely used in heat recovery of boiler economizer, air preheater, and waste heat boiler, as well as heat exchange equipment in chemical industry, pressure vessel and other fields. The capacity of units used in boilers has also increased from small to large, and their applications are increasing day by day. At present, many professional manufacturers in China can produce high frequency resistance welding, brazing spiral finned tubes, and the production equipment and technology of finned tubes have been developed, designed and manufactured from importation, digestion and absorption to self-development. The quality has reached the requirements of advanced foreign standards.
1.Finned Tube Heat Exchangers consist of a shell and finned tubes assembly.
2.Fins are used to increase the effective surface area of heat exchanger tubing.
3.Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside;as in heat transfer from a liquid to a gas,vapor to a gas ,such as steam to air heat exchanger, thermic fluid to air heat exchanger, when an extended surface is needed on only one fluid side or when the operating pressure needs to be contained on one fluid side.
Technical parameter
| Medium | air, flue gas, thermal oil, water, brine, refrigerant, etc. |
| Temperature | standard heat exchanger to 560 ° C by special materials can be higher |
| Pipe materials | carbon steel, stainless steel, alloy or special materials |
| Ribs materials | carbon steel, stainless steel, non-ferrous metal, alloy or special materials |
| Thermal insulation &Surface treatment | according to customers specification |
Features
1. The equipment body can be designed into many modules to ensure the long term and stable running;
2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage
3. Improve the heat transfer efficiency
4. Structure arrangement: In line or staggered arrangement
Details
Company Introduction
Established in 1985,Zhangjiagang Hua Dong Boiler Co.,Ltd.(trading as HD Boiler),produces power plant; industrial; waste heat; waste incineration; biomass; organic heat carrier and electric steam boilers. Coupled with a comprehensive range of heating surfaces, HD Boiler brings to the market a unique service including boiler design , fabrication, installation, maintenance and replacement of boiler pressure parts.
1. Fabrication area of 200,000 square meters
2. 150 Engineers
3. 600 Coded welders
4. 60 Licensed Inspectors(NDT Level-III instructors)
5. Class-A Licenses for Design and Manufacture Boiler
6. ISO 9001:2008 Quality System
7. ASME Certificate of Power Boilers
8. ASME 'S','U' and NB stamp authorization
Aspectos destacados del producto
High Frequency Welding Spiral Fin Tube For Customized Heat Exchanger Can Boiler Fin Tubes be customized according to boiler specifications? Yes, Boiler Fin Tubes can be fully customized. Manufacturers can adjust parameters such as base tube diameter (e.g., 25mm/38mm), fin height (e.g., 10mm/15mm), ...
Calderas de alta presión de potencia Calentamiento de la superficie de la membrana de la pared Soldadura de arco de argón para calderas de biomasa
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Economizador de tubos H Fin de soldadura de alta frecuencia para calderas de centrales eléctricas ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Acero al carbono SA192 Supercalentador bobina soldadura por arco de argón 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Calderas industriales SA210A1 Calderas de acero Economizador de intercambio de calor Parte Certificación ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Por favor, utilice nuestro formulario de contacto de consulta en línea de abajo si tiene alguna pregunta, nuestro equipo se pondrá en contacto con usted tan pronto como sea posible.
