logo
productos
DETALLES DE LOS PRODUCTOS
Hogar > Productos >
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production

Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production

Cuota De Producción: 10
Precio: $2,200-2,500
Información detallada
Lugar de origen
Zhangjiagang, China
Nombre de la marca
HD Boiler
Certificación
ISO9001,ASME,SGS,EN,TUV
Número de modelo
Tipo desnudo Economizador
Tipo:
Circulación natural
Estructura:
Tubos de fuego y de agua
Presión:
Bajo/de alta presión
Producción de vapor:
No más de 60 t/h
Estilo:
Vertical
Combustible:
Fuentes de energía
Producción:
Agua caliente/vapor
Tratamiento superficial:
Pintado
Tubería desnuda OD:
25-1650 mm
Espesor de la tubería desnuda:
2-40 mm
Grosor de la aleta:
0.6-3.0 mm
Altura de la aleta:
5-30 mm
Tono de tubo de aleta:
5-30 mm
Longitud del tubo de aleta:
≤12000 mm
Material:
Acero al carbono, aleación, acero austenítico
Resaltar:

Max 60t/h Steam Production Boiler Economizer

,

Low High Pressure Boiler Economizer

,

Finned Tubes Boiler Economizer

Descripción del producto
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes
Boiler Economizer
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 0
Introduction
The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It recovers this energy by heating the boiler feedwater. Economizers are tubular heat transfer surfaces used to preheat boiler feed water before it enters the steam drum or furnace surfaces, reducing operating costs by recovering extra energy from flue gas.
Procedure
Economizers also reduce the potential for thermal shock and strong water temperature fluctuations as feed water enters the drum or waterwalls. Increasingly stringent environmental regulations limiting nitrogen oxides and sulfur dioxide emissions can affect economizer design. The gas-side heat transfer coefficient is much less than the water-side coefficient, so outer tube surfaces may be finned to increase heat transfer surface area. The ultimate goal of economizer design is to achieve necessary heat transfer at minimum cost, with maximum allowable flue gas velocity being a key design criterion.
Specifications
Name (unit) Specification (mm)
Bare pipe (OD) 25-1650
Bare pipe (Thickness) 2-40
Fin (Thickness) 0.6-3.0
Fin (Height) 5-30
Fin tube thread pitch 5-30
Fin tube length ≤12000
Material: Carbon Steel, Alloy, Austenitic Steel (Nickel and Chromium or Manganese)
Quality Control
  • Impact test and Strength calculation report with applied materials information
  • 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
  • X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
  • Hydraulic test report to ensure standard working pressure and safety
Similar Products
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 1
Company Information
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 2
Certificate
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 3
Packaging & Shipping
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 4
FAQ
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 5
Contact Us
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 6
productos
DETALLES DE LOS PRODUCTOS
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production
Cuota De Producción: 10
Precio: $2,200-2,500
Información detallada
Lugar de origen
Zhangjiagang, China
Nombre de la marca
HD Boiler
Certificación
ISO9001,ASME,SGS,EN,TUV
Número de modelo
Tipo desnudo Economizador
Tipo:
Circulación natural
Estructura:
Tubos de fuego y de agua
Presión:
Bajo/de alta presión
Producción de vapor:
No más de 60 t/h
Estilo:
Vertical
Combustible:
Fuentes de energía
Producción:
Agua caliente/vapor
Tratamiento superficial:
Pintado
Tubería desnuda OD:
25-1650 mm
Espesor de la tubería desnuda:
2-40 mm
Grosor de la aleta:
0.6-3.0 mm
Altura de la aleta:
5-30 mm
Tono de tubo de aleta:
5-30 mm
Longitud del tubo de aleta:
≤12000 mm
Material:
Acero al carbono, aleación, acero austenítico
Cantidad de orden mínima:
10
Precio:
$2,200-2,500
Resaltar

Max 60t/h Steam Production Boiler Economizer

,

Low High Pressure Boiler Economizer

,

Finned Tubes Boiler Economizer

Descripción del producto
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes
Boiler Economizer
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 0
Introduction
The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It recovers this energy by heating the boiler feedwater. Economizers are tubular heat transfer surfaces used to preheat boiler feed water before it enters the steam drum or furnace surfaces, reducing operating costs by recovering extra energy from flue gas.
Procedure
Economizers also reduce the potential for thermal shock and strong water temperature fluctuations as feed water enters the drum or waterwalls. Increasingly stringent environmental regulations limiting nitrogen oxides and sulfur dioxide emissions can affect economizer design. The gas-side heat transfer coefficient is much less than the water-side coefficient, so outer tube surfaces may be finned to increase heat transfer surface area. The ultimate goal of economizer design is to achieve necessary heat transfer at minimum cost, with maximum allowable flue gas velocity being a key design criterion.
Specifications
Name (unit) Specification (mm)
Bare pipe (OD) 25-1650
Bare pipe (Thickness) 2-40
Fin (Thickness) 0.6-3.0
Fin (Height) 5-30
Fin tube thread pitch 5-30
Fin tube length ≤12000
Material: Carbon Steel, Alloy, Austenitic Steel (Nickel and Chromium or Manganese)
Quality Control
  • Impact test and Strength calculation report with applied materials information
  • 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
  • X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
  • Hydraulic test report to ensure standard working pressure and safety
Similar Products
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 1
Company Information
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 2
Certificate
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 3
Packaging & Shipping
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 4
FAQ
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 5
Contact Us
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 6
Mapa del Sitio |  Política de privacidad | China es buena. Calidad Bobina del sobrecalentador Proveedor. Derecho de autor 2017-2025 Zhangjiagang HuaDong Boiler Co., Ltd. Todo. Todos los derechos reservados.